launch x431 Diagun III Introduce

As we know Launch x431 diagun iii is the new item of launch, but many buyer feedback when he use x431 diagun iii, there is many problem for them,Here we list to install Launch X431 DiagunIII battery and How to install Launch X431 Diagun III TF card, Sincerely hope these messagecan help you to use x431 diagun iii professionaly

This post is to introduce Launch X431 Diagun III supported languages, car models, connections and how to update. Hope can help you. As the following is the details:
1. Launch X431 DIAGUN III language X-431 DIAGUN III full support: English, Spanish, French, Italian, Russian, German, Denish,Polish, Finnish, Dutch, Czech, Norwegian, Portuguese, Japanese, Swedish, Slovenia, Thai, Turkish,Greek, Hungarian, Arabic, Korea.
2. Launch X431 DIAGUN III supported car models X-431 Diagun III is the newest specially designed diagnostic tool for automotive technicians.Cover nearly all domestic vehicle makes and Asian, European, American vehicle makes, the only
diagnostic tool which can work on two vehicles at the same time.
3.Launch X431 DIAGUN III Connections
Bluetooth (wireless) / Cable (wired) connections
X-431 Diagun III Bluetooth (wireless) Connection Procedure:
1. Insert the TF card into the slot;
2. Find out the vehicle’s DLC;
3. Plug the 16 PIN end of DBScar diagnostic connector into the vehicle’s DLC.
4.Launch X431 Diagun III update
Launch X431 Diagun III is universal OBDII Diagnostic Scanner update online at Launch x431 official website for one year free of charge.

How to install Launch X431 Diagun III TF card
Installation steps are as follows:
1. Take out the TF card from package box.
2. Insert the TF card into the X-431 Diagun III TF card slot perpendicularly. Make sure it is fully

inserted in the right place with the “micro “label facing upward. See Fig.d and e.

How to install Launch X431 Diagun III battery
Install steps are described as below:
1. Follow Fig.a to push the bottom cabinet forward to open position, and then remove it.
2. Take out the battery form the package box and install it as indicated on Fg.b.
3. Cover the reader cabinet and push it backwards to the original position, as shown on Fig.c.
To disassemble the battery, reverse the steps that you followed to install the battery.

The more information about OBD2 scanner,please vistit obd2works