Car will "lose his temper" ,elaborate three kinds of maintenance methods

Now the car has become a necessity in our lives, we go out essential transport. But the car occasionally noisy little temper in life, some glitches in the owners simply are not aware of it. So today we will talk about the owners about vehicle maintenance and repair approach.
     Each owner will not guarantee their cars not a little wrong, when the car "angry" creeping some small problems when their owners should be how to do it? Here we've put together three of their owners automotive repair method a little restraint temper. Together we learn about it.
     Tires were slashed
     Car tires were slashed is what often happens in life, and car tires were slashed tend to occur very suddenly. So the owner to traffic safety experts recommended that owners of foreign mend afterwards to find a professional tire repair shop for the fill. After the internal and the need to disassemble the tire with a professional tool to disassemble the tire off the wheel to find the broken hole, using the dedicated hot vulcanizing machine heating up. Digiprog III V4.88 Odometer Programmer With Full Software New Release
     Fuel consumption surge
     Automotive fuel consumption problem is something the owners were very concerned that if the owners were in the car when the car's fuel consumption suddenly found a lot more than usual, then the description of the car itself is a problem. The reason for this generally leads to a rapid increase in fuel consumption may be due to slipping clutch, automobile engine tachometer motivation increased rapidly resulting in a surge in fuel consumption.
     Brake failure
     Brake failure is not a small thing, it relates to their owners small traffic safety, so owners who want to learn in life how to exclude brake failure, there are three methods of continuous brake pedal to see there is no air brake system. The second is the case of successive foot brake is not working is because of improved brake gap is too large. Third brake pedal, not weak unsinkable, but that poor braking effect, this phenomenon is the wheel brake failure.
     Tips:
     The usual small car can easily lead to failure when the car is moving to the owners at risk, so they should be timely for the owners of these small problems repaired. Assurance that their driving safety.
     This article edited by obd2works,to buy cheap and quality car diagnostic scanner,please visit www.obd2works.com

How to Use Your Digiprog III

After you get your digiprog III,what you need to figure out first is how to power it up.Remember you should use a regulated 12 volt power supply and once you use anything above 13.5 volts to power the digiprog III,it may cause the damage to the main circuit and then you have to send the machine to your digiprog dealer for repairment.Besides,when you connect it to a vehicle by OBD,remember don't use the cigar lighter lead,the digiprog III takes power from the vehicle.And after you power your machine up,there will show a window while it is loading and you can find your digiprog's status and software version,also there will show you the unique 12 digit electronic serial number.

After your digiprog III finishes the loading,there will show an information screen with a disclaimer regarding the use of the machine.Then press the tick button when you are OK.There will ask you for a password to be entered so you can use the machine.The default password is "1",but you can change it in the "SETUP".
After you get in the machine,there will show you the main menu screen,you can see "EEPROM", "CAR/TRUCK", "MOTORCYCLE", "SPECIAL FUNCTIONS" and "SETUP" in the "MAIN MENU",and then you can enter either one you want and get the according functions working with your vehicle.

DigiProg III introduction

Digiprog iii stability should be used to do the 12 volt power supply, if you use more than 13.5 volts, the power load on the machine Digiprog III, it may cause the circuit board to be burned, and then had to send it to your dealer for repairs digiprog
DO NOT use the cigar lighter lead when connected to a vehicle by OBD,Failure to observe will result in damage not covered by the warranty.
When your DigiProg is powered up, this screen will be displayed whilst your machine is loading:

On this screen your DigiProg’s status/software version is displayed along with your machines unique 12 digit electronic serial number.
When your DigiProg has finished loading an information screen will appear with a disclaimer regarding the use of the machine. When you are ready, press the check/tick button.

The DigiProg will then ask for a password to be entered before the machine can be used. The default password is set to 1 but can be changed in the SETUP function see The setup menu

Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles
The remaining functions i will introduce the next article,by the way, welcome to our obd2 shop:www.obd2works.com,we providing our customers with a vast range of high-quality and affordable automobile maintenance tools,Our main business line covers: Automotive Professional Diagnostic Tools for OBD I and OBD II compliant vehicles; Auto Diagnostic tool, OBD2 Code Scanners, ECU Chip Tuning Tool, Car Key programmer Mileage Programmer as well as other more featured products.