Sunday, April 6, 2014

The Safety Points Of Using the Multi-Diag

You need to remember that the Multi-Diag should be used in compliance with the ACTIA instructions and it is designed only for professional use.

When you use the Multi-Diag,you should make sure that for for the Multi-Diag master,the ambient temperature should between 0°C and 45°C and for Multi-Diag mobile,it should between 0°C and 35°C.Besides,never expose the tablet under sunlight for a long time; never put the cables and peripherals near heat sources or hot materials; never use it in the rain or on damp,wet surface or it may cause the electric leakage and damage the Multi-Diag, also don't splash liquids on it;

Apart from what I mentioned above,you also need to pay attention to the following things.Don't use any peripherals which are not supplies by ACTIA, don't install any software that is not recommended by ACTIA. You need try to avoid using it for several hours without breaking or some parts of it may become too hot and shorten its life.
Remember don't place the Multi-Diag on the stowage location of the airbag incase the airbag be triggered;Don't make the cables running over the table corners or workbenches, and don't pull on the mains' cable when you unplug the table from the power supply.When you are operating,please handle the plastic parts so that you won't be burned and grip the connector.The last,don't force openning the CD-ROM drive or it may damage the tablet, and don't drop the Multi-Diag.But once the Multi-Diag is damaged,you should not continues to use it but should contact the after-sales service for help.If you broke the screen glass,don't inhale,youch or ingest the liquid crystals.

No comments:

Post a Comment