Wednesday, April 2, 2014

About The ZEDBULL Transponder Clone Key Programmer Tool

In this article,let's see the key program tool--Zedbull.On the machine's screen,you can see the device information which includes the S.NO,the version,the device token and the PC token.Users need to contact your local distributor for both device token and the PC token.The tokens can be loaded.First,choose the fifth choice on the main menu--Settings,then click "Load PC Token",the device will show the outcode,you need to give the outcode to your local distributor and they will return you the incode.After you get the incode,enter it to the corresponding place then the tokens will be loaded to the Zedbull.Please be careful,if you enter the wrong incode 5 times repeatedly.the device will want new incode.
When you turn on the power switch of the Zedbull,you should put the security login card on the antenna,or the Zedbull cannot work.If you have any problem with the security login card,you should contact the local distributor immediately.On the tool,the red one with "R" means the function of reading and the red one with "W" means writing.
Also in the "Setting",you can also update the Zedbull.You need to load the update file and select the right file for the device and click the "Update",it will start updating automatically.When the progressing bar shows one hundred percent and it means the update is finished.
Zedbull can identify the transponders,clone the transponders and produce transponders, and it owns the EEPROM and MCU applications and the PC software.All the functions of the Zedbull can be update with the development of technologies.

No comments:

Post a Comment